(1) FWD, AFT, PORT, STB’D, Inboard, Outboard, Top and BTM on drawing denote the direction when the ship is in ordinary condition.
(2) Looking Port : Condition from an angle of “A” -“A” (ELEV., side drawing)
(3) Looking Down : Condition from an angle of “B”-“B” (PLAN., plane drawing)
(4) Looking FWD : Condition from an angle of “C”-“C” (SEC., section drawing)
1.Direction of ship 2.Midship Section
Every hull assembly drawing shall be drawn as below pictures of 3(ELEV.), 5-4(PLAN.), 5(SEC.). In case of drawing in other directions, declarations such as LOOK’G STB’D, LOOK’G AFT, LOOK’G Up, etc. must be written.
Also, in case of view watching direction must be declared. (Picture 6)
(* View is to draw not-plain areas such as C/L, B/L and frame line.)
Alte articole asemanatoare
At first you see an overview of the different fusion welding processes.
The list of pressure welding processes according to classification of the energy transfer medium which is used for welding ...
Basic definition of ship: special construction, tight, with capability for floating and traveling in given way, with one established speed and defined purpose. The ship represents one big floating complex ...
The ship isa special construction, watertight, andableto floaton the waterto movein one direction would,with asteady speedwith aspecific purpose
To be fit for purpose a ship must be able to operate safely ...
ISO 857-1 was widely, up to and including chapter 3, replaced by EN 14610 in view of the harmonisation of the European internal market and in the course of globalisation. ...
Overview of the Metal Welding Processes
Some examples of maritime ships
Ship’s construction and architecture.General notions.
Symbols, Numbers, Indexes of Welding Process